Roll-N-Go 2000 Shore Dock
Roll-N-Go 2000 Shore Dock - Image 2

Roll-N-Go 2000 Shore Dock

Call for Price

Questions?

Now you can easily and inexpensively dock and secure your fishing boat or other pleasure boat out of the water, right on your shoreline. The heavy duty Roll-n-Go 2000 roller ramp shore dock handles boats up to 2000 lbs. It’s the perfect replacement for cumbersome, in-water lifts. This shore dock is typically used for 16′ to 18′ fishing boats, jet boats, etc.

Delivered Right to your Waterfront Home or Cottage.

Category:

Description

  • Rail width adjusts from 24″ to 40″ to fit most small boats.
  • Easy to assemble and install.
  • Quality, zinc plated winch for effortless cranking.
  • Welded aluminum construction and stainless steel fasteners ensure years of durable, worry free use.
  • Security tie down loop to allow locking of your boat.
  • High quality 4″ wide polyurethane, self aligning rollers for smooth operation.
  • At just 162 lbs the Roll-n-Go roller ramp shore dock can be readily disassembled into sections for easy storage over the winter.
  • Overall length of 18 feet
  • Optional, 9 ft. long extensions and supports are available for applications where a longer ramp is needed.
  • Optional, 1,500 lb. self braking winch available for steeper applications.
MODEL 2000 SPECIFICATIONS
MAX. WEIGHT CAPACITY 2,000 lbs.
WEIGHT 162 lbs.
OVERALL LENGTH 17 feet 10 inches
OVERALL WIDTH Adjustable 33″- 49″
RAIL WIDTH Adjustable 24″- 40″
ROLLER TYPE Ribbed 4″ wide Polyurethane
NUMBER OF ROLLERS 24
ROLLER BEARING Rocking Delrin sleeve
TILTING ROLLER AXLE Yes
CONSTRUCTION Aluminum
HARDWARE Stainless Steel
WINCH

  • “Dead lift” Rating
  • Gear Ratio
  • Strap Length
  • Hook Type
 Zinc Plated
1,700 lbs.
5:1
25 feet
Standard Boat Hook
ANCHORING (included with kit) Screw-in Ground Anchor with all Hardware
MIN. REQUIRED ANCHORING Screw in or fasten to wall or footing
WARRANTY 5 Years for fresh water applications
2 years for salt water applications
DIMENSIONS
Download the Roll-n-Go Operating and Assembly Instructions (1,900KB Pdf)
OPTIONS
ADD-ON SECTIONS Available 8′ 11″
WINCH UPGRADE Available 1500 lb, self braking with 50′ cable
SUPPORT LEG KIT Available
WIDE SUPPORT KIT Available

Specifications

View the Roll-N-Go Operating and Assembly Instructions

Using Your Roll-N-Go 2000 Shore Dock

To use, simply pull your boat up to the Roll-N-Go roller ramp shore dock, hook on the strap and crank it up to easily get off the water in just seconds. Tilting axles, each with two extra-wide urethane rocking rollers, gently cradle any boat hull. The Roll-n-Go 2000 shore dock includes a standard 1700 lb. winch with 25 foot strap.